7.0 inch TFT Display Modules | 1024x600 RGB IPS TFT Screen | TFT Module Display 

This 7.0 inch TFT Display Modules TFT-H070A2WSIFT8N50 is designed for high-stability industrial applications. Its core display performance is based on a resolution of 1024×600 pixels, using RGB vertical arrangement (each pixel consists of three sub-pixels: red, green, and blue), which can present clear and delicate image effects. The 7.0 inch TFT Display Modules is connected to the main control device through a 24-bit TTL parallel interface, supports a pixel clock frequency of up to 51.2 MHz (typical value), and can meet the dynamic picture requirements of a 60Hz refresh rate. The display area is 154.21mm (horizontal) × 85.92mm (vertical), the overall appearance is compact, and the size is 164.90mm × 100.00mm × 5.50mm. The frame design takes into account both structural strength and installation adaptability.

The 7.0 inch TFT Display Modules adopts a white LED backlight solution with a typical brightness of 800 cd/m2 (needs to be achieved at a driving current of 40mA), combined with a high-transmittance LCD panel and wide viewing angle technology (horizontal and vertical viewing angles of 85°), ensuring visibility in complex lighting environments. Its optical characteristics include a typical contrast ratio of 800:1, a color gamut coverage of approximately 50% (based on CIE standard illuminant C), and support for color temperature adjustment (white point color coordinates x=0.308, y=0.336). The response time is 30-40ms (rise + fall), suitable for static or medium and low-speed dynamic picture scenes. The driving part is coordinated by the EK79001 and EK73215 chipsets, supports 3.3V main power supply (range 3.0-3.6V), and provides VGH (+18V), VGL (-6V) and analog circuit voltage AVDD (9.6V) required for high-voltage drive through independent power pins to ensure stable panel drive.

The synchronization mode can be flexibly configured to DE (data enable) or HSD/VSD (horizontal/vertical synchronization) mode through the MODE pin to adapt to the timing requirements of different main control chips. In terms of scanning direction control, the L/R pin sets the horizontal pixel output order (left or right shift), and the U/D pin controls the vertical scanning direction (from top to bottom or from bottom to top), which is convenient for adapting to diverse hardware layouts. The 7.0 inch TFT Display Modules has built-in ESD protection design, contact discharge ±4kV, air discharge ±8kV, and has passed rigorous reliability tests, including high temperature operation (60℃/120 hours), low temperature storage (-20℃/120 hours), wet heat cycle (60℃/90%RH/120 hours), thermal shock (-30℃?80℃/100 cycles) and vibration/shock test (in line with industrial-grade anti-vibration standards) to ensure long-term stable operation in harsh environments.

In terms of precautions for use, the module emphasizes avoiding the display of static images for a long time (recommended not to exceed 2 minutes) to prevent the retention of liquid crystal molecules and cause afterimages. It is recommended to dynamically refresh the screen through the screen saver function. Mechanical protection should avoid direct impact on the glass panel. Anti-static measures should be taken during installation (such as wearing a grounding wrist strap and controlling the ambient humidity to >50%RH). The backlight driver needs to match the 9.6V forward voltage with a 240mA constant current source. It is recommended to use PWM dimming to extend the life of the LED. This module does not require additional initialization code and can be driven directly by standard TTL timing. This 7.0 inch TFT Display Modules is suitable for industrial HMI, medical equipment, vehicle-mounted instruments, automation control terminals and other fields with strict reliability requirements. this 7.0 inch TFT Display Modules is especially suitable for application scenarios that require wide temperature operation, strong anti-interference ability and long life design.